 |
| | | | | | |
|
| YOUR SOURCE ... for Pharmaceutical, Chemical, Plastics and Related Process Equipment. |
|
|
 |
Home :
MILLS
:
HOMOGENIZER
|
| |
 |
|
|
|
|
|
|
|
 |
 |
|
|
|
|
PREMIER DISPERSATOR, 125 GAL TANK, S/S, 15 HP
|
Premier Dispersator, 125 Gal Tank, S/S, 15 Hp
ONE (1) Used Premier Dispersator, 15 H.P., Series 6000, mounted in approx. 125 gallon stainless steel tank, approx. 32" diameter x 3' straight side, on legs.
|
|
|
|
|
|
|
|
|
|
|
PREMIER DISPERSATOR, 75 GAL TANK, S/S, 5 HP
|
Premier Dispersator, 75 Gal Tank, S/S, 5 Hp
ONE (1) Used Premier Dispersator, 5 H.P., Series 4000, mounted in approx. 75 gallon stainless steel tank, approx. 2'4" diameter x 2'6" straight side.
|
|
|
|
|
|
|
|
|
|
|
SS3000SGR CHERRY-BURRELL HOMOGENIZER
|
Ss3000Sgr Cherry-Burrell Homogenizer
ONE (1) Used Cherry-Burrell Super Homo Homogenizer, Model SS3000SGR, stainless steel construction, two stage 2 1/4" plunger diameter, 2630 gallons per hour at 1800 PSI, Poppet Style Suction and Discharge Valves, 2 1/2" tri clamp inlet connection, 2" bevel seat outlet, 60 H.P. 230/460 volt drive, Serial No. 720198-701, painted frame.
|
|
|
|
|
|
|
|
|
|
|
A-1630-E CHERRY-BURRELL HOMOGENIZER
|
A-1630-E Cherry-Burrell Homogenizer
ONE (1) Used Cherry-Burrell Homogenizer, Model A-1630-E stainless steel construction, rated 1162 GPH, 2000 PSI operating pressure, single stage, manually controlled, poppet style suction and discharge valves, 2 3/8" diameter plungers, 2 1/2" bevel seat inlet, 2" bevel seat outlet, with approx. 40 H.P. drive, 230/460 volt.
|
|
|
|
|
|
|
|
|
|
|
400CGD GAULIN HOMOGENIZER, 3000 #
|
400Cgd Gaulin Homogenizer, 3000 #
ONE (1) Used Gaulin Homogenizer, Model 400CGD, stainless steel construction, 3000 PSI, 400 gallon per hour max., 1/ 3/4" diameter plungers, dual stage ball valves, with drive. AS IS.
|
|
|
|
|
|
|
|
|
|
|
MODEL 3DD25 CREPACO HOMOGENIZER, STAINLESS STEEL
|
Model 3Dd25 Crepaco Homogenizer, Stainless Steel
ONE (1) Used Model 3DD25 Crepaco Multi-Flow Homogenizer stainless steel clad construction, sanitary product contact parts, rated 125 GPM minimum @ 3500 PSI to 500 GPM @ 2000 PSI, single stage homogenizing valve assembly manually controlled, keyed cylinder design, free standing floor model complete with 10 H.P. 3/60/230-460V drive, Serial No.
C-6906-3DD25.
|
|
|
|
|
|
|
|
|
|
|
IKA DISPAX MIXER, MODEL DR 2000/50, S/S, 250 HP
|
Ika Dispax Mixer, Model Dr 2000/50, S/S, 250 Hp
One (1) used IKA DISPAX three stage inline high shear pump, type DR 2000/50, stainless steel construction, three stage with (3) 6F fine generator (rotor blades), 6" inlet, 6" outlet, rated up to 550 gpm, 1100 rpm max rotor speed on base with 250 hp, 460 volt , 1785 rpm motor with AC variable frequency controller, mechanical seal with lubrication pot on stainless steel base, model# P005987, serial# 1091.
|
|
|
|
|
|
|
|
|
|
|
M-210B-EH MICROFLUIDICS MICROFLUIDIZER, S/S, 15 HP
|
M-210B-Eh Microfluidics Microfluidizer, S/S, 15 Hp
ONE (1) Used Microfluidics Microfluidizer, Model M-210B-EH, stainless steel construction, rated .5 - .6 GPM @ 4000 to 18000 PSI, operational capacity, 1 gallon to continuous sample size, mounted in stainless steel enclosure with 15 HP 230/460 volt hydraulic unit, Serial No. 94065, New 1994.
|
|
|
|
|
|
|
|
|
|
|
IKA POWDER LIQUID MIXER, MODEL CMS 2000/40, S/S
|
Ika Powder Liquid Mixer, Model Cms 2000/40, S/S
One (1) used IKA powder liquid mixer, type CMS 2000/40, stainless steel construction, 4" powder inlet, 6" liquid inlet, 6" outlet, rated 440 gpm output, 30,000#/hour powder feed rate on stainless steel base with 150 hp, 460 volt, 1785 rpm motor with AC variable frequency controller, mechanical seal with lubrication pot, on stand, model# P005986, serial# 1086.
|
|
|
|
|
|
|
|
|
|
|
ADMIX HIGH SHEAR MIXER WITH TANK
|
Admix High Shear Mixer With Tank
One (1) used Admix high shear mixer, model 200RS159, mounted on 875 gallon, 304 Stainless Steel tank, 60'' diameter x 66'' straight side, cone top, dish bottom,off center top entering Admix high shear disperser/ dissolver, approximate 2-1/2'' diameter 316 stainless steel shaft with 6'' diameter mixing head, driven by a 30hp, 3/60/230/460 volt, 1760 rpm motor. Openings top 2-3/8'' threaded, 4-3/8'' threaded, and a 32'' with 18'' x 14'' oval manway with cover, 5-1/2'', 13-1/2'' drive, 3'' Center bottom outlet with pad, no valve, 4 Side lug mounts, Admix serial# 16990-1, new 2002..
|
|
|
|
|
|
|
 |
 |
|