MILLS  »  PELLET
12
select
    Items 1 to 12 of 23
 

image
One (1) used Bliss Industries Pioneer Series Pellet Mill, Model B-200B-250, Carbon Steel. (3) Approximate 15-7/8"diameter x 9-7/8" face rollers, approximate 34-13/16" diameter x 10" deep die with 3/8" holes, die area 1,080 square inches, roll area 492 square inches. Mill driven by (2) 200 hp, 3/60/460 volt, 1189 rpm motors. Top mounted screw conveyor feeder, 14" diameter x 132" long, driven by a 10hp motor, into a conditioning feeder, driven by a 50 hp,3/60/230/460 volt, 1185 rpm motor with reducer. Hinged front door with discharge. Year built: 1998. Reconditioned in 2009.

DETAILS:
Size: 400.000
Manufacturer: BLISS
In Stock: 1
Item #: 34311

FULL DETAILS

image
One (1) used Bliss Industries Pioneer Series Pellet Mill, Model B-200B-250, Carbon Steel. (3) Approximate 15-7/8"diameter x 9-7/8" face rollers, approximate 34-13/16" diameter x 10" deep die with 3/8" holes, die area 1,080 square inches, roll area 492 square inches. Mill driven by (2) 200 hp, 3/60/460 volt, 1189 rpm motors. Top mounted screw conveyor feeder, 14" diameter x 132" long, driven by a 10hp motor, into a conditioning feeder, driven by a 50 hp,3/60/230/460 volt, 1185 rpm motor with reducer. Hinged front door with discharge. Year built: 1998. Reconditioned in 2009.

DETAILS:
Size: 400.000
Manufacturer: BLISS
In Stock: 1
Item #: 34312

FULL DETAILS

image
One (1) used Bliss Industries Pioneer Series Pellet Mill, Model B-200B-250, Carbon Steel. (3) Approximate 15-7/8"diameter x 9-7/8" face rollers, approximate 34-13/16" diameter x 10" deep die with 3/8" holes, die area 1,080 square inches, roll area 492 square inches. Mill driven by (2) 200 hp, 3/60/460 volt, 1189 rpm motors. Top mounted screw conveyor feeder, 14" diameter x 132" long, driven by a 10hp motor, into a conditioning feeder, driven by a 50 hp,3/60/230/460 volt, 1185 rpm motor with reducer. Hinged front door with discharge. Year built: 1998. Reconditioned in 2009.

DETAILS:
Size: 400.000
Manufacturer: BLISS
In Stock: 1
Item #: 34313

FULL DETAILS

image
One (1) used Bliss Industries Pioneer Series Pellet Mill, Model B-200B-250, Carbon Steel. (3) Approximate 15-7/8"diameter x 9-7/8" face rollers, approximate 34-13/16" diameter x 10" deep die with 3/8" holes, die area 1,080 square inches, roll area 492 square inches. Mill driven by (2) 200 hp, 3/60/460 volt, 1189 rpm motors. Top mounted screw conveyor feeder, 14" diameter x 132" long, driven by a 10hp motor, into a conditioning feeder, driven by a 50 hp,3/60/230/460 volt, 1185 rpm motor with reducer. Hinged front door with discharge. Year built: 1998. Reconditioned in 2009.

DETAILS:
Size: 400.000
Manufacturer: BLISS
In Stock: 1
Item #: 34314

FULL DETAILS

image
One (1) used Bliss Industries Pioneer Series Pellet Mill, Model B120A-141, Carbon Steel. (3) Approximate 11-11/16" diameter x 5-9/16" face rollers, 25-11/16" diameter x 5-9/16" deep die with holes, die area 448 square inches, roll area 205 square inches. Die speed 140/154 rpm, track speed 943/1036 feet per minute. Mill driven by (2) 75 hp, 3/60/460 volt, 1180 rpm motors. Top mounted screw conveyor conditioner, model F-16-18, serial# 4093, 14" diameter x 96" long, driven by a 10hp, 3/60/208-230/460 volt, 1760 rpm motor with reducer, ratio 24.91 to 1. Hinged front door with discharge, serial# 3073

DETAILS:
HP: 150.000
Manufacturer: BLISS
In Stock: 1
Item #: 35534

FULL DETAILS

image
One (1) used Dravo pelletizing disk, stainless steel construction, 14" diameter disk, on base with .25 hp motor.

DETAILS:
Size: 14.000
Manufacturer:
In Stock: 1
Item #: 38802

FULL DETAILS

image
One (1) used Hosokawa Bepex pellet extruder, model GCS 200/80, stainless steel construction, 200 mm diameter x 80 mm wide twin dies, stainless steel hopper with lump breaker driven by .25 kw motor, 7.5 kw, 240/480 volt main drive, shop# 211033, Hosokawa# 13359.

DETAILS:
HP: 7.500
Manufacturer: HOSOKAWA BEPEX
In Stock: 1
Item #: 42281

FULL DETAILS

image
One (1) used Fuji Paudal Marumerizer, model QJ-1000, 316 stainless steel product contact surfaces, 304 stainless steel non-contact surfaces, jacketed bowl rated .19 MPa, 1000 mm diameter bowl, 50 liter nominal batch capacity, side discharge with pneumatically operated plug valve, 7.5 hp, 460 volt, xp motor drive with control panel, serial# 490106, new 2002

DETAILS:
HP: 7.500
Manufacturer: FUJI PAUDAL
In Stock: 1
Item #: 42539

FULL DETAILS

image
ONE (1) Used Aeromatic Nica Mixer/Granulator, Type M6, all stainless steel construction, rated 2-6 Kg/min. trough put with 5 HP mixer drive, 1/2 HP powder feeder drive, 1/2 HP liquid addition pump, explosion proof with controls, 230/460 volt motors, Serial No. 608-07.

DETAILS:
HP: 5.000
Manufacturer: NICA
In Stock: 1
Item #: 25863

FULL DETAILS

image
ONE (1) Used Nica lab scale spheronizer, model S320, stainless steel construction, 0.2 - 1.0 Kg batch capacity, with 1.5 KW variable speed drive, 200-1200 RPM, air purge, rated 60 liters/min @ 4 bar, with pneumatic discharge valve, serial no. 5661028.

DETAILS:
HP: 2.011
Manufacturer: NICA
In Stock: 1
Item #: 26772

FULL DETAILS

image
ONE (1) Used Model EXDS-60 Fuji-Paudal X-Truder, sanitary stainless steel construction, twin screw rated 30-50 kg/hr working capacity, pan feed, on base with 1.5 KW (2 H.P.) variable speed drive, 460 volt, explosion proof, Serial No. 15893, New 1984.

DETAILS:
HP: 2.000
Manufacturer: FUJI-PAUDAL
In Stock: 1
Item #: 18626

FULL DETAILS

image
One (1) used Niro Fielder NICA spheronizer, model S-450, stainless steel construction, 450mm diameter bowl, nominally rated .4-2 kg batch size, approximately 1.5 kw variable speed motor, 380/415 volt, 3 phase, 50 hertz on base with controls.

DETAILS:
HP: 1.500
Manufacturer: NIRO FIELDER
In Stock: 1
Item #: 35925

FULL DETAILS


12
select
    Items 1 to 12 of 23
© 2000-2014 Federal Equipment Company, All rights reserved.