 |
 |
Home :
Dryers
:
Holoflite
|
| |
 |
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
16" X 7' RIETZ/BEPEX THERMASCREW DRYER,304 S/S
|
16" X 7' Rietz/Bepex Thermascrew Dryer,304 S/S
One (1) used Rietz/Bepex thermascrew dryer, model TL-16-K3208, 304 stainless steel construction, single screw, 16" diameter x 7' long screw, 16.5" wide x 8' long x 20" deep trough, jacketed trough rated for 150 PSI @ 366 F, hinged top cover, bottom end discharge, belt driven with 2 HP 230/460 volt motor 19.8:1 gear box ratio, on stainless steel legs, serial# TL-90000649, new 1990.
|
|
|
|
|
|
|
|
|
|
|
18" X 20' CHRISTIAN HOLOFLITE DRYER, 304S/S
|
18" X 20' Christian Holoflite Dryer, 304S/S
One (1) used Christian engineering holoflite dryer, model 18-20-6/XNC (BI), 304 stainless steel construction, (2) 18" diameter x 20' long screws, 6" pitched flites, cored screws and flites, rated 100 PSI, stainless steel jacketed trough and end plates rated 15 PSI, with carbon steel fume hood 14" x 16" inlet, 16" x 24" discharge on base with gear box rated 10 HP less motor and drive, serial# 77360, new 1995.
|
|
|
|
|
|
|
|
|
|
|
26-6 STRONG-SCOTT TORUS DISC DRYER, 12 CF, S/S
|
26-6 Strong-Scott Torus Disc Dryer, 12 Cf, S/S
ONE (1) Used Strong-Scott Torus Disc Dryer, Model 26-6, 96 sq. ft. surface area, 12 cu. ft. working capacity, 7 to 28 RPM screw speed, stainless steel construction, fully jacketed, 50 PSI working pressure at 300 degrees F, National Board Nos. 140 and 141, Model #TDJS, Serial No. TD90236, approx. 26" diameter screw, variable speed drive.
|
|
|
|
|
|
|
|
|
|
|
3" X 3' JOY DENVER HOLOFLITE PROCESSOR,S/S
|
3" X 3' Joy Denver Holoflite Processor,S/S
ONE (1) Used Joy-Denver Holoflite Processor, Type P-69901-6, Model J, stainless steel construction, twin screw, 3" diameter x 36" L screws, electrically heated, flat cover, 1/4 H.P. variable speed drive, 110 V, on portable stand, Serial No. 821.
|
|
|
|
|
|
|
|
|
|
|
4" X 4' THERM-A-CORE SLUDGE DRYER, MDLJ4X4-B-2.5, S/S
|
4" X 4' Therm-A-Core Sludge Dryer, Mdlj4X4-B-2.5, S/S
ONE (1) Used Therm-a-Core Sludge Dryer, Model J4X4-B- 2.5 stainless steel construction, twin screw, 4" dia- meter x 4' long screws, 2" pitch, screws rated 70 PSIG at 600 degrees F, jacket rated 30 PSIG at 600 degrees F 1/2 H.P. 230 volt drive with gear reducer, Machine Serial No. 3801, complete with Fulton Thermal Fluid Heater System, Model FT-0075-N, 75,000 BTU/Hr., 22 KW with Fulton Control Panel, 7 1/2 H.P. Circulation Pump, National Board No. 59811, on unitized base.
|
|
|
|
|
|
|
|
|
|
|
8" X 12' CHRISTIAN BROTHERS COOLING SCREW, S/S
|
8" X 12' Christian Brothers Cooling Screw, S/S
ONE (1) Used Christian Brothers Cooling Screw, 8" diameter x 12' long screw, stainless steel construction cored screw with 6" pitched flites, rotary union, trough fully jacketed, with drive.
|
|
|
|
|
|
|
|
|
|
|
8" X 15' RIETZ THERMASCREW, S/S
|
8" X 15' Rietz Thermascrew, S/S
ONE (1) Used Rietz Thermascrew, stainless steel construction 8" diameter x 15' long cored screw, with 2" pitched flites, fully jacketed trough, rotary union, with covers.
|
|
|
|
|
|
|
|
|
|
|
MODEL 1P4210JTD BETHLEHEM PORCUPINE PROCESSOR, 316 S/S, 88 CF
|
Model 1P4210Jtd Bethlehem Porcupine Processor, 316 S/S, 88 Cf
ONE (1) Used 88 cu. ft. Bethlehem Porcupine Processor, Model 1P4210JTB, 316 stainless steel construction, 42" diameter x 10' long cored agitator with 240 sq. ft. heat transfer area, 42" wide x 10' long trough rated full vacuum internal at 200 degrees F, 304 stainless steel jacketed shell rated 50 PSI at 260 degrees F, with 50 H.P. motor drive rated for 20 RPM shaft speed, center bottom outlet on stands.
|
|
|
|
|
|
|
|
|
|
|
MODEL 24-22.5XN-B CHRISTIAN BROTHERS THERM-L-VEYOR, C/S
|
Model 24-22.5Xn-B Christian Brothers Therm-L-Veyor, C/S
ONE (1) Used Christian Brothers Therm-L-Veyor Cooler, Model 24-22.6XN-B-Uni, 24" diameter x 22.5' long screw, carbon steel construction, cored screw and flites with rotary union, jacketed trough, 6" pitch, 18" x 25" discharge, 7.5 H.P. variable speed motor, chain and sprocket driven, 230/460 volt, Serial No. 77193.
|
|
|
|
| | |