 |
 |
Home :
Extruders
:
Dump/Hot Feed
|
| |
 |
|
|
|
|
|
|
|
 |
 |
|
|
|
|
10" FARREL DUMP EXTRUDER 7:1 L/D
|
10" Farrel Dump Extruder 7:1 L/D
ONE (1) Used 10" Farrel Dump Extruder, 7:1 L/D, 48" long jacketed barrel, 28" X " feed section with pneumatic stuffer, cored screw with rotary union, Model 2V gear box, 17.804:1 gear ratio, gear box rated 450 HP less motor, gear box reconditioned in 1991, Serial No. 74A1555.
|
|
|
|
|
|
|
|
|
|
|
10" NRM DUMP EXTRUDER, 7:1 L/D, 125 HP
|
10" Nrm Dump Extruder, 7:1 L/D, 125 Hp
ONE (1) Used 10" NRM Dump Extruder, 7:1 L/D, 12" x 12" feed throat, jacketed barrel, cored screw with rotary union, 5' barrel section, 25.05:1 gear box ratio, with 125 H.P. DC Motor, belt driven, 10 H.P. hydraulic pump, 460 volt, Serial No. MM16. AS IS.
|
|
|
|
|
|
|
|
|
|
|
10" ROYLE DUMP EXTRUDER, 6:1 L/D
|
10" Royle Dump Extruder, 6:1 L/D
One (1) used 10" Royle dump extruder 6:1 L/D, two-zone jacketed barrel, 11" x 12" jacketed feed throat with chute, 42" center line height, swing away 1.5" diameter die with 150 HP 575 volt motor through Royle 3A gearbox with transformer and AC drive, serial# 4041.
|
|
|
|
|
|
|
|
|
|
|
3 1/2" STERLING HOT MELT EXTRUDER, 40 HP
|
3 1/2" Sterling Hot Melt Extruder, 40 Hp
ONE (1) Used 3 1/2" Sterling Hot Melt Extruder, 17:1 L/D, cored screw, 10 1/2 x 14 1/2 feed section, jacketed feed, (3) barrel zones, electric heat, water cooled, vented and plugged, 40 H.P. DC Drive, Alten Gear Box, 13 Hole Strand Die with Clamp.
|
|
|
|
|
|
|
|
|
|
|
4.5" BERLYN HOT MELT EXTRUDER, 10:1 L/D,125 HP
|
4.5" Berlyn Hot Melt Extruder, 10:1 L/D,125 Hp
ONE (1) Used 4.5" Berlyn Hot Melt Extruder, 10:1 L/D, electrically heated, 13" X 23" tapered feed opening, jacketed feed section, cored screw with rotary union, 3 barrel zones, 1 die zone, 125 H.P. DC drive, 14:1 gear box ratio, Serial # 116D954.
|
|
|
|
|
|
|
|
|
|
|
8 1/2" FARREL DUMP EXTRUDER, 10:1 L/D, 150 HP
|
8 1/2" Farrel Dump Extruder, 10:1 L/D, 150 Hp
ONE (1) Used Farrel Dump Extruder, 8 1/2" screw, 13" x 8 1/2" tapered screws, 24" feed section with pneumatic stuffer, 20" x 22" feed opening, 10:1 L/D, 56" barrel 30:1 gear box ratio, with 8" hydraulic screen changer with hydrualic power pack, Farrel underwater pelletizer with water box and die and cutter with DC motor, serial# 58A1553.
|
|
|
|
|
|
|
|
|
|
|
8"X4 1/2" FARREL-POMINI DUMP EXTRUDER UNDERWATER PELLE.
|
8"X4 1/2" Farrel-Pomini Dump Extruder Underwater Pelle.
ONE (1) Used Farrel-Pomini Dump Extruder, size 8" x 4 1/2" screw, conical taper, 15" x 15" feed opening, 79" from front of feed opening to the end of the barrel 12:1 L/D, jacketed barrel, 6.33:1 gear box ratio, units are presently equipped with 8" Farrel-Pomini Underwater Pelletizers. AS IS.
|
|
|
|
|
|
|
 |
 |
|