 |
|
|
|
|
3/4" BRABENDER EXTRUDER, 15:1 L/D, PLASTICORDER
|
3/4" Brabender Extruder, 15:1 L/D, Plasticorder
ONE (1) Used C.W. Brabender Extruder, 3/4", 15:1 L/D, Type 150, S/N 1497, Model PLV/50 Drive, 1.5 H.P., 1/60/230V, Serial No. 2718/66, with Plasticorder.
|
|
|
|
|
|
|
|
|
|
|
3/4" BRABENDER LAB EXTRUDER, 20:1 L/D
|
3/4" Brabender Lab Extruder, 20:1 L/D
ONE (1) Used Brabender 3/4" Lab Extruder 20:1 L/D with Plastograph, .75 H.P. 3/60/220V DC motor drive, on base.
|
|
|
|
|
|
|
|
|
|
|
3/4" KILLION EXTRUDER, 24:1 L/D, 1 HP
|
3/4" Killion Extruder, 24:1 L/D, 1 Hp
ONE (1) Used 3/4" Killion extruder, 24:1 L/D, electrically heated, water cooled, 2 barrel zones, 1 die zone, with 1 HP drive, 180/200 volt DC with SCR, pedestal mounted, serial# 2793, with 2" blown film die.
|
|
|
|
|
|
|
|
|
|
|
BRABENDER PLASTICORDER TYPE EPL-V501 MIXING/EXTRUDER SYSTEM
|
Brabender Plasticorder Type Epl-V501 Mixing/Extruder System
ONE (1) Used Brabender Plasticorder, Type EPL-V501, Troque Rheometer, with 5 H.P. 230 volt motor with controls, Serial No. 041, Type 230V11AMP Mixing Head, less blades, Serial No. 0093, Type 2503 Extruder, 3/4" diameter, 25:1 L/D, electrically heated, water cooled, 3 barrel zones, 1 die zone with temp controls, Serial No. 992, on base.
|
|
|
|
|
|
|
|
|
|
|
BRABENDER PREP CENTER WITH EXTRUDER
|
Brabender Prep Center With Extruder
ONE (1) Used Brabender Prep Center with Model D-7502, 7.5 HP 230 Volt DC motor with SCR Controller drive, model 2523, 3/4" single screw extruder, 25:1 L/D, serial no. 1008, 11" wide puller/film stand with extension, 2" pelletizer with bolt on knives, 4 zone control panel mounted on prep center base, Serial No. 305.
|
|
|
|
|
|
|
|
|
|
|
HAAKE RHEOCORD SYSTEM 40 MIXER/EXTRUDERSYSTEM
|
Haake Rheocord System 40 Mixer/Extrudersystem
ONE (1) Used Haake Rheocord System 40, Model 80-40-000, Torque Rheometer, Serial No. 85040, with Model 600 Rheomix Head, electrically heated, jacketed bowl, Serial No. 811-0, and 3/4" 24:1 L/D Extruder Head, electrically heated, water cooled, vented and plugged with 1" sheet die and single hole strand die.
|
|
|
|
|
|