 |
 |
Home :
Extruders
:
Twin-Counter-Rotate
|
| |
 |
|
|
|
|
|
|
|
 |
 |
|
|
|
|
110MM PROCESSING TECH TWIN SCREW EXTRUDER
|
110Mm Processing Tech Twin Screw Extruder
ONE (1) Used 110 MM Processing Tech Twin Screw Extruder, Model TS110, 24:1 L/D, electrically heated, air cooled, (2) 4.375" diameter screws, counter rotating, intermeshing, (3) barrel segments, (1) 33", (1) 17", (1) top vented 48" long segments, 4" diameter water cooled feed throat with hopper with 150 H.P. DC Drive, 41" centerline, MG13 Model 4500, 4 1/2" hydraulic screen changer, with 2 H.P. power pack, 30 hole strand die, controls station with Eurotherm Digital Controllers, Reliance VS DC Drive, Serial #60191.
Rebuilt 1991.
|
|
|
|
|
|
|
|
|
|
|
130MM DAVIS STANDARD TWIN SCREW EXTRUDER, GC8HD
|
130Mm Davis Standard Twin Screw Extruder, Gc8Hd
One (1) used Davis Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barrel, jacketed feed section, 48" long vented barrel with vacuum pump, 17.4:1 gearbox ratio with 40 HP 260/460 volt AC motor with AC variable speed controller, on unitized base with control panel with 4 barrel, 1 flange and 4 die zones, serial# BK182 SO# 83090, gearbox new 2006.
|
|
|
|
|
|
|
|
|
|
|
130MM DAVIS STANDARD TWIN SCREW EXTRUDER, GC8HD
|
130Mm Davis Standard Twin Screw Extruder, Gc8Hd
One (1) used Davis Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barrel, jacketed feed section, 48" long vented barrel with vacuum pump, 17.4:1 gearbox ratio with 40 HP 460 volt AC motor with AC variable speed controller, on unitized base with control panel with 4 barrel, 1 flange and 4 die zones, serial# P9286 SO# 52526, new 1994.
|
|
|
|
|
|
|
|
|
|
|
130MM DAVIS STANDARD TWIN SCREW EXTRUDER, GC8HD
|
130Mm Davis Standard Twin Screw Extruder, Gc8Hd
One (1) used Davis Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barrel, jacketed feed section, 48" long vented barrel with vacuum pump, 17.4:1 gearbox ratio with 40 HP 230/460 volt AC motor with AC variable speed controller, on unitized base with control panel with 4 barrel, 1 flange and 4 die zones, serial# AV939 SO# 78858, new 2004.
|
|
|
|
|
|
|
|
|
|
|
130MM DAVIS STANDARD TWIN SCREW EXTRUDER, GC8HD
|
130Mm Davis Standard Twin Screw Extruder, Gc8Hd
One (1) used Davis Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barrel, jacketed feed section, 48" long vented barrel with vacuum pump, 17.4:1 gearbox ratio with 40 HP 460 volt AC motor with AC variable speed controller, on unitized base with control panel with 4 barrel, 1 flange and 4 die zones, serial# P9271 SO# 52526, new 1994.
|
|
|
|
|
|
|
|
|
|
|
55MM CINCINNATI MILACRON TWIN SCREW EXTRUDER, CM55
|
55Mm Cincinnati Milacron Twin Screw Extruder, Cm55
ONE (1) Used Cincinnati Milacron twin screw extruder, model CM55, 55 mm conical screws, counter rotating, electrically heated, water cooled with water circulation system and pump, vented barrel with vacuum pump, 40 HP DC motor, control panel with 4 barrel, 4 die zones with temperature controllers, 2 HP feeder.
|
|
|
|
|
|
|
|
|
|
|
55MM CINCINNATI MILACRON TWIN SCREW EXTRUDER, E55
|
55Mm Cincinnati Milacron Twin Screw Extruder, E55
ONE (1) Used Cincinnati Milacron twin screw extruder, model E55 Pinacle, 55 mm conical screws, counter rotating, electrically heated, water cooled, vented barrel with vacuum pump, 40 HP DC motor with PLC controller, with 4 barrel, 3 die zones, 2 HP feeder, new 2000.
|
|
|
|
|
|
|
|
|
|
|
62MM AMERICAN MAPLAN TWIN SCREW EXTRUDER, DSK62
|
62Mm American Maplan Twin Screw Extruder, Dsk62
One (1) used American Maplan twin screw extruder, model DSK62, 62mm conical screws, counter rotating, built-in oil heating and cooling with tank, heat exchanger and pump, 4 zone top vented barrel with pump, water cooled feed throat with dosing feeder, 40 HP 500 volt DC motor, on unitized base with Powertec DC drive and controls, serial# 132256, new 1995.
|
|
|
|
|
|
|
|
|
|
|
80MM LEISTRITZ TWIN SCREW EXTRUDER, 25:1 L/D
|
80Mm Leistritz Twin Screw Extruder, 25:1 L/D
One (1) used 80mm Leistritz twin screw extruder, 80mm parallel screws, counter rotating, 25:1 L/D, electrically heated, air cooled, jacketed feed section, vented barrel with vacuum pump, 71 KW 460 volt DC motor with SCR controller, slide plate screen changer, panel view PLC operator panel, rebuilt by Entek, serial# H013, new 2000.
|
|
|
|
| | |