 |
|
|
|
|
1' X 3' EIMCO EXTRACTOR BELT VACUUM FILTER
|
1' X 3' Eimco Extractor Belt Vacuum Filter
ONE (1) Used 1' x 3' Eimco Extractor Belt Vacuum Belt Filter, 3 sq. ft. effective surface area equipped with rubber belt, fiberglass contact surfaces complete on base with 3/4 H.P. drive.
|
|
|
|
|
|
|
|
|
|
|
10" X 10' PANNEVIS VACUUM BELT FILTER MODEL RT
|
10" X 10' Pannevis Vacuum Belt Filter Model Rt
ONE (1) Used Pannevis Horizontal Vacuum Belt Filter, Model RT, .25M wide X 3.2M long (10" wide x 10' long) belt, 8.6 sq. ft. surface area, stainless steel contact surfaces, with slurry feed connection and (3) wash water stations, 7.5 HP Travaini Liquid Ring Vacuum System with pump and filtrate tanks, on base with 3/4 HP DC belt motor drive, Serial No. PN-103.
|
|
|
|
|
|
|
|
|
|
|
10" X 10' PANNEVIS VACUUM BELT FILTER MODEL RT
|
10" X 10' Pannevis Vacuum Belt Filter Model Rt
ONE (1) Used Pannevis Horizontal Vacuum Belt Filter, Model RT, .25M wide X 3.2M long (10" wide X 10' long) belt, 8.6 sq. ft. surface area, stainless steel contact surfaces, with slurry feed connection and (3) wash water stations, 20 HP Travaini Liquid Ring Vacuum System with pump and filtrate tanks, on base with 3/4 HP DC belt motor drive, Serial No. PN-104.
|
|
|
|
|
|
|
|
|
|
|
12" EIMCO EXPRESSOR BELT FILTER, S/S
|
12" Eimco Expressor Belt Filter, S/S
ONE (1) Used Eimco Expressor Continuous Dewatering Belt Filter, 12" face, Model 1PA, stainless steel construction, hydraulically driven with 10 H.P. 230/460 volt hydraulic pump, tension controls, 18'6" long x 4'5" wide x 8'1" high, approx. 6500#, Serial No. 82216-01-AR.
|
|
|
|
|
|
|
|
|
|
|
14" X 12'6" DENVER BELT VACUUM FILTER, S/S
|
14" X 12'6" Denver Belt Vacuum Filter, S/S
ONE (1) Used Denver Belt Vacuum Filter, 14" wide x 12'6" long rubber belt, 316 stainless steel support structure, 10' long vacuum pan, 1 sq. meter surface area, 2 H.P.
230/460 volt drive unit, Serial No. 189791-001, Order No. 998091-001.
|
|
|
|
|
|
|
|
|
|
|
18" X 11'6" STRAIGHT LINE BELT VACUUM FILTER
|
18" X 11'6" Straight Line Belt Vacuum Filter
ONE (1) Used 18" x 11'6" Straight Line Belt Vacuum Filter, approx. 15 sq. ft. effective area, rubber belt, approx.
10' long vacuum section, AS IS.
|
|
|
|
|
|
|
|
|
|
|
2' X 7' STRAIGHT LINE BELT VACUUM FILTER
|
2' X 7' Straight Line Belt Vacuum Filter
ONE (1) Used 2' x 7' Straight Line Belt Vacuum Filter, 10.5 sq. ft. effective area, rubber belt, complete on base with 1 H.P. variable speed drive, 3/60/220-440 volt, AS IS.
|
|
|
|
|
|
|
|
|
|
|
20" X 100" KOMLINE SANDERSON ADPEC HOR. VAC BELT FILTER
|
20" X 100" Komline Sanderson Adpec Hor. Vac Belt Filter
ONE (1) Used Komline-Sanderson ADPEC, Horizontal Vacuum Belt Filter Model 0.5 M x 2.25 M (nominal), 12.1 sq.
ft. effective filtration area, 20" wide x 100" long vacuum tray assembly, with 10" pool section, (2) 10" form sections, (3) 10" wash sections, and (4) 10" dry sections, polypropylene and stainless steel construction, polypropylene cloth assembly, 10 H.P. Sihi Model LPH40517 Vacuum Pump, Goulds Model 3196STX, 316 stainless steel primary filtrate pump with 2 H.P. motor, Warren-Rupp "Sandpiper" Air Powered Double Diaphragm Cloth Wash Return Pump, 304 stainless steel frame assembly, cake wash sprayhead assembly, 12" diameter x 24" high 304 stainless steel vacuum receiver, all mounted complete with controls on 18' long x 8' wide x 5'5" high deck assembly, 8600# shipping weight. Unit purchased new in 1993 and used in very limited service in research facility. New Spare Cloth Belt available.
|
|
|
|
|
|
|
|
|
|
|
4 SQ FT OBERLIN AUTOMATIC PRESSURE FILTER, MODEL OPF-4
|
4 Sq Ft Oberlin Automatic Pressure Filter, Model Opf-4
One (1) used Oberlin automatic pressure filter, model OPF-4, stainless steel and carbon steel construction, 4 square feet filter area, 28" wide x 60" long belt, approximate press are 25" x 29', bottom discharge pan, cloth advance driven by 1/4 HP 230/460 volt gear motor, 60:1 gearbox ratio, with control panel, on base, serial# 17-43.
|
|
|
|
| |