 |
 |
Home :
Mills
:
Pebble Jar
|
| |
 |
|
|
|
|
|
|
|
 |
 |
|
|
|
|
10' X 84" HARDINGE CONICAL PEBBLE MILL WTIH 10' RAYMOND AIR SEPARATOR
|
10' X 84" Hardinge Conical Pebble Mill Wtih 10' Raymond Air Separator
ONE (1) Used Hardinge 10' diameter x 84" Conical Granite Lined Pebble Mill, air swept continuous design, direct herringbone pinion and bull gear drive with gear reducer and 250 H.P. motor drive, 40" self aligning bearings, 6' diameter fan driven by 250 H.P. motor, Raymond Mechanical Air Separator with 200 H.P. Motor Drive, approx. 10' diameter x 34" straight side, 12' conical bottom, approx.
10' diameter x 15'6" high primary cyclone and two approx.
6' diameter x 15'6" high secondary cyclones. Martin Lubricating System for Mill Bearings, Mill relined in 1998 and in excellent condition, fully welded construction, new bearings installed in 1989, along with new Voith Turbo Coupling, main drive motor installed new in 1995.
|
|
|
|
|
|
|
|
|
|
|
18" SWECO VIBRO ENERGY FINISHING MILL
|
18" Sweco Vibro Energy Finishing Mill
ONE (1) Used 18" Sweco Vibro Energy Finishing Mill, urethane liner, with plastic cover, 1/3 H.P. drive, 3/60/440V, 1200 RPM, Serial No. IDM 582-465-45F.
|
|
|
|
|
|
|
|
|
|
|
2' X 3' PATTERSON PEBBLE MILL, CERAMIC LINED
|
2' X 3' Patterson Pebble Mill, Ceramic Lined
ONE (1) Used Patterson Pebble Mill, 2' diameter x 3' straight side, ceramic lined, carbon steel construction, gear and pinion driven, on stands less drive and motor, Serial No. 1838, AS IS.
|
|
|
|
|
|
|
|
|
|
|
3' X 3'6" PATTERSON PEBBLE MILL, CERAMICLINED
|
3' X 3'6" Patterson Pebble Mill, Ceramiclined
ONE (1) Used Patterson Pebble Mill, 3' diameter x 3'6" straight side, ceramic lined, jacketed shell, 3 H.P. drive, 220/440 volt, gear and pinion driven, on stands, Serial No. T5486.
|
|
|
|
|
|
|
|
|
|
|
3' X 4' PATTERSON PEBBLE MILL, CERAMIC LINED
|
3' X 4' Patterson Pebble Mill, Ceramic Lined
ONE (1) Used Patterson Pebble Mill, 3' diameter x 4' straight side, ceramic lined, carbon steel construction, with pinion gear on stand less drive and motor, Serial No.
F963, AS IS.
|
|
|
|
|
|
|
|
|
|
|
3' X 4' PATTERSON PEBBLE MILL, CERAMIC LINED
|
3' X 4' Patterson Pebble Mill, Ceramic Lined
ONE (1) Used Patterson Pebble Mill, 3' diameter x 4' straight side, ceramic lined, carbon steel construction, with pinion gear on stand, less drive and motor, AS IS.
|
|
|
|
|
|
|
|
|
|
|
3' X 4' PATTERSON PEBBLE MILL, CERAMICLINED
|
3' X 4' Patterson Pebble Mill, Ceramiclined
ONE (1) Used Patterson Pebble Mill, ceramic lined, 3' diameter x 4' straight side, carbon steel construction, complete with 7.5 H.P. drive, gear and pinion driven, on stands, Serial No. 685693.
|
|
|
|
|
|
|
|
|
|
|
3' X 4' PATTERSON PEBBLE MILLS, 3 HP,-2
|
3' X 4' Patterson Pebble Mills, 3 Hp,-2
TWO (2) Used Patterson Pebble Mills, ceramic lined, 3' diameter x 4' straight side, carbon steel construction, complete with 3 H.P. drive, gear and pinion driven, on stands, Serial No. 653175.
|
|
|
|
|
|
|
|
|
|
|
3' X 5' PAUL ABBE PEBBLE MILL, 316 S/S,CERAMIC LINED
|
3' X 5' Paul Abbe Pebble Mill, 316 S/S,Ceramic Lined
ONE (1) Used Paul Abbe Pebble Mill, Model #5AS, 3' diameter x 5' straight side, 30 cu. ft. total capacity, 7.5 cu. ft.
working capacity, 316 stainless steel contact surfaces, Alumina Ceramic Lining, rated 14.7 PSI and full vacuum internal @ 26.7 degrees C (80 degrees F), jacketed for 14.7 PSI @ 26.7 degrees C (80 degrees F), stainless steel exterior skin, stainless steel dual drum lifting mechanism with side by side 18" charge ports with 316 stainless steel covers, complete on stainless steel legs with 7.5 H.P.
main drive, 5 H.P. brake drive, rotary unions, control panel and guards. Serial No. A44751, 1994. Previously used in pharmaceutical application and in excellent condition.
|
|
|
|
|
|
|
| |