 |
|
|
|
|
2.25" BONNOT PUG MILL EXTRUDER, 10 HP
|
2.25" Bonnot Pug Mill Extruder, 10 Hp
ONE (1) Used 2-1/4" Bonnot Extruder, Model 24, 20:1 L/D, segmented jacketed barrel with 4 zones, 4" X 6" feed opening on base with 10 HP 230/460 Volt variable speed drive, Serial #2030.
|
|
|
|
|
|
|
|
|
|
|
4" BONNOT PUG MILL EXTRUDER, C/S, 3 H.P.
|
4" Bonnot Pug Mill Extruder, C/S, 3 H.P.
ONE (1) Used 4" Bonnot Pug Mill Extruder, Model LV, 4" diameter x 43" L screw, carbon steel construction, 29"L feed section, 10" jacketed section, 3 H.P. variable speed drive, S/N 1461, swing gate die holder.
|
|
|
|
|
|
|
|
|
|
|
4" BONNOT PUG MILL EXTRUDER, C/S, 5 HP
|
4" Bonnot Pug Mill Extruder, C/S, 5 Hp
ONE (1) 4" Bonnot Pug Mill Extruder, 4" diameter x 44" L screw, carbon steel construction, 28" L feed section, 7" L jacketed section, 5 H.P. variable speed drive, 130:1 ratio.
|
|
|
|
|
|
|
|
|
|
|
4" ECONOMY PUG MILL EXTRUDER, C/S, 5 HP
|
4" Economy Pug Mill Extruder, C/S, 5 Hp
ONE (1) Used 4" Economy Pug Mill Extruder, 4" diameter x 34" L screw, carbon steel construction, 22" L feed section with pneumatic ram, 6" jacketed section, 5 H.P. variable speed drive.
|
|
|
|
|
|
|
|
|
|
|
6" BINACCHI DUAL VACUUM PLODDER, S/S, 7.5 HP
|
6" Binacchi Dual Vacuum Plodder, S/S, 7.5 Hp
ONE (1) Used Binacchi dual vacuum plodder, model DVPB160, stainless steel construction, dual set of 160mm twin screws, vacuum chambers, with (2) 1.5 HP liquid ring vacuum pumps, (2) 7.5 HP main drives, with die face cutters, stainless steel enclosure and feed hopper, with control panel, serial no. 1663, new 1993.
|
|
|
|
|
|
|
|
|
|
|
6" CEECO EXTRUDER, 40 HP HYDRAULIC DRIVE
|
6" Ceeco Extruder, 40 Hp Hydraulic Drive
ONE (1) Used 6" Ceeco Extruder, 18" jacketed barrel section, 9" feed section, roll feed, swing gate die holder, jacketed barrel, complete on floor mounting base, variable speed hydraulic drive with 40 H.P.
Vickers Pump.
|
|
|
|
|
|