 |
|
|
|
|
003 FLUID AIR MILL, S/S, 5 HP
|
003 Fluid Air Mill, S/S, 5 Hp
ONE (1) Used Model 003 Fluid Air Mill, stainless steel construction including chamber, cover, base, legs, and control panel, 3" wide hammer, set up for screw feed with drive and pan feed, 5 HP 230/460 volt main drive with VFD controller.
|
|
|
|
|
|
|
|
|
|
|
1 HP DUAL SHAFT DELUMPER
|
1 Hp Dual Shaft Delumper
ONE (1) Used Dual shaft delumper, stainless steel 9" x 11 1/2" feed opening with hopper. Driven by a 1 HP, 3/60/230/460 volt, 1730 RPM gearmotor. Mounted on a stainless steel frame with casters.
|
|
|
|
|
|
|
|
|
|
|
10" P & E CO. FLUID ENERGY MILL, STAINLESS STEEL
|
10" P & E Co. Fluid Energy Mill, Stainless Steel
ONE (1) Used P & E Co. Fluid Energy Mill, stainless steel construction, 6" air inlet/outlet, 10" diameter circular body, 8" take-off flange, feed hopper.
|
|
|
|
|
|
|
|
|
|
|
12" STOKES TORNADO MILL, MODEL 44-1, 10H.P.
|
12" Stokes Tornado Mill, Model 44-1, 10H.P.
ONE (1) Used Stokes Tornado Mill, Model 44-1, stainless steel construction, 12" diameter rotor, stainless steel feed hopper, on stainless steel base, with 10 H.P. 230/460 volt XP motor.
|
|
|
|
|
|
|
|
|
|
|
12" STOKES TORNADO MILL, MODEL 44-1, 10H.P.
|
12" Stokes Tornado Mill, Model 44-1, 10H.P.
ONE (1) Used Stokes Tornado Mill, Model 44-1, stainless steel construction, 12" diameter rotor, stainless steel feed hopper, on stainless steel base, with 10 H.P. 230/460 volt XP motor.
|
|
|
|
|
|
|
|
|
|
|
12" X 12" DELUMPER, 3 HP
|
12" X 12" Delumper, 3 Hp
One (1) used 12" x 12" delumper, with 12" x 12" flange feed opening, rotor designed for belt drive, requires approx 3 HP motor.
|
|
|
|
|
|
|
|
|
|
|
15" STURTEVANT AIR JET PULVERIZING SYSTEM, S/S
|
15" Sturtevant Air Jet Pulverizing System, S/S
ONE (1) Used Sturtevant Air Jet Pulverizing System, Model 15, stainless steel construction, 15" diameter, with volumetric feeder, stainless steel cyclone fines collector and 150 HP air compressor with refrigerated air dryer, Sturtevant Serial No. 5025.
|
|
|
|
|
|
|
|
|
|
|
2" FLUID ENERGY JET MILL S/S
|
2" Fluid Energy Jet Mill S/S
ONE (1) Used 2" Fluid Energy Jet-O-Mizer Mill, Model 0202, stainless steel construction, on base with cyclone, Serial No. Y9464-E.
|
|
|
|
|
|
|
|
|
|
|
2" GLEN MILLS JET MILL, S/S
|
2" Glen Mills Jet Mill, S/S
One (1) used 2" Glen Mills laboratory jet mill, stainless steel construction, vertical bench top design, size reduction 10 microns and below with cyclone and collection jar.
|
|
|
|
|
|
|
|
|
|
|
2.2 KW IKA HIGH SHEAR BATCH MIXER
|
2.2 Kw Ika High Shear Batch Mixer
One (1) used IKA high shear batch mixer, model UTC-T80/2KT, stainless steel shaft and blade, 2.2 KW 460 volt with AC inverter on portable stainless steel cart with pneumatic lift, serial# 0605.
|
|
|
|
| |